Home » Devices » Ready for You » Connected AirWits CO2 Monitor
Connected AirWits CO2 Monitor
- Battery included
- Temperature
- Humidity
- CO2 Sensor
Connected AirWits CO2 Monitor is a carbon dioxide (CO2), temperature and humidity measuring device to monitor air quality remotely. The device sends the measurement data in configurable time intervals (typically 30 min) through the 0G Network, powered by Sigfox.

Main Features
- Every 30 minutes measures and sends: CO2 level, Temperature, Humidity
- CO2 monitoring solution range: 0 ~ 5,000 ppm
- Temperature range: 0 ~ 60°C
- Humidity range: 0 ~ 95 %
- Uses Sigfox IoT- network for data transmission
- Measurement interval can be configured remotely via the network
- Extremely simple procedure
- Maintenance-free (plug n play)
- Ultra low cost, powerful
- Warranty 1 year
Technical Details
Connectivity
Sigfox: Single zone – RC1, RC2, RC4 or RC7.
Mechanics & Design
Dimensions (in mm): 100 x 100 x 28 mm
Weight: 186g (inc. batteries)
Enclosure Rating: IP20 (indoor use only)
Recommended Operating Temperature: 0 to +60°C
Material: ABS plastic
Color: White
Different Mounting Options Available: 3M tape, screws
Battery
Battery Life: 5 years assuming 30 minute measurement interval and transmission via 0G Network
Battery Type: Battery pack consisting of 3x AA (3.6V) FANSO 18505H batteries
Quantity per Device: 1 Battery Pack
Battery Replaceable: Yes – Contact Thinxtra
Included with device: Yes, pre-installed
Total Battery Capacity (mAh): 12,300mAh
Smart Firmware
OTA Configuration Updates: Device behaviour is configurable remotely via Sigfox 0G Network
Sensor Measurement Interval: Configurable from 10 minutes to 24 hours
Sensors
CO2 Sensor:
- Range: 0 … 5,000 ppm (parts per million)
- Accuracy: 50 ppm or 3 % or the reading
- Sensor: GSS CozIR LP / Sensirion SHT30
Temperature Sensor:
- Range: 0 to 60 °C
- Accuracy: 0.2 °C / 3 %
Humidity Sensor:
- Range: 0 to 95%
- Accuracy: 2%
Platforms
Foxer IoT: Optional
Certification
Sigfox Ready: Yes, class 0
RCM: Yes
FCC: Yes
CE: Yes