Skip to content

Xsense

indicator-rc1, 2, 3, 4

Xsense is a multi-sensor device enabling various configurations, perfect for system integrations and solutions providers. It embeds Sigfox connectivity, NFC & geolocation vis GPS (outdoor) and WiFi SSID or BLE (indoor), a push button (On demand location, sensor reading or downlink), 3D accelerometer, humidity sensor, temperature sensor, pressure sensor, reed switch with a USB rechargeable Lithium battery & LED.

img-xsense-banner

Main Features

  • Geolocation vis GPS (outdoor)
  • Geolocation via WiFi SSID or BLE (indoor)
  • Button
  • LED visual status indicator
  • Up to 2.4 months once daily GPS location, up to 1.7 months 9 daily GPS locations per each full charge
  • Retrieve up to 254 Previous Message (Triggered by Platform)
  • IP40 safety protection
  • Simply place & trace easy installation
  • Configuration Parameters over the air (basic or above Sigfox air-plan)
  • Battery status and low battery alert
  • Movement Alert (Authorised or Unauthorised as per Platform)
  • Integrated accelerometer
  • Humidity monitoring & alert
  • Temperature monitoring & alert
  • Monitor door/window open or close status
  • Atmospheric pressure monitor
img-xsense-inside battery

Click and drag below for a full render of the device

Selected Solutions

Technical Details

Housing with Push Button: The IP40 rated housing with push button made of ABS/Polycarbonate for indoor use environment.
Mounting Accessories: Provided back clip for carry around and hanging on wall.
Weight (g): Net weight: 82g | Gross weight: 140g
Dimensions (mm): Device: L100 x W45 x H16 mm | Box: L120 x 80 x H40mm
Operating Temperature: -20°C to +60°C Note: performance & battery life will be affected if device operation in extreme temperatures.)
Storage Temperature: Recommended 15°C & Maximum 30°C

Connectivity

Sigfox Communications: High power radio transmitter/receiver that operates on the Sigfox network, and is available in variants for the various Sigfox Radio Zones around the world.
Sigfox Radiation: RC1 & RC4 Sigfox ready, RC2 & RC3 sample ready
Sigfox Regions: RCZ1: Europe, Middle East, South Africa, Pacific Islands RCZ2: USA, Canada, South America RCZ3: Japan RCZ4: Australia, New Zealand, Singapore,
OTA Configuration: Parameter changes via Sigfox Downlink (over-the-air configuration). Consult the Xsense Quickstart integration guide for details.

Mechanics & Design

Housing with Push Button: The IP40 rated housing with push button made of ABS/Polycarbonate for indoor use environment.
Mounting Accessories: Provided back clip for carry around and hanging on wall.
Weight (g): Net weight: 82g | Gross weight: 140g
Dimensions (mm): Device: L100 x W45 x H16 mm | Box: L120 x 80 x H40mm
Operating Temperature: -20°C to +60°C Note: performance & battery life will be affected if device operation in extreme temperatures.)
Storage Temperature: Recommended 15°C & Maximum 30°C

Battery

Batteries: Custom Rechargeable Li Ion Polymer 530mAh

 

Sensors

Humidity sensor: Operational Range 0% ~ 100%
Temperature sensor: Operational Range -40°C ~ 85°C Full Accuracy Range 0°C~65°C
Pressure sensor: Full Accuracy Range 300 hPa ~ 1100 hPa
Reed switch: Vibration Resistance 10G Shock Resistance 100G
3-axis accelerometer: The 3-axis accelerometer allows the Xsense to ‘sleep’ in an ultra-low power state yet still wakeup when movement occurs.

 

Outdoor GPS Tracking

GPS and Sigfox Antenna: Internal GPS and Sigfox antennas tuned by RF laboratories for optimal performance. GPS accuracy range from 20 m ~ 100m
GPS tracking: High sensitivity GPS receiver, -165dBm tracks 66 channels and 22 simultaneous tracking channels.
Low Noise GPS Amplifier (LNA): GPS signals are boosted by a special low-noise amplifier (LNA).
GPS: Support GPS and GLONASS

 

Indoor Tracking

WiFi Sniffing: Xsense scans WiFi access points and reports up to two AP MAC address or SSID to backend with signal strength.
WiFi Specification: WiFi 2.4GHz: Support 802.11 b/g/n
BLE Sniffing: Xsense scans BLE beacons and reports up to two beacons MAC address or SSID to backend with signal strength.
BLE Specification: BT4.2

 
 
Certification

Regulatory Certifications: CE & RCM
Sigfox Ready Certification: RC1 & RC4 (RC2 & RC3 In Progress)


Wearable Options

STAY TUNED

Sign up for our X News

Thinxtra X News shares the latest news and case studies from Thinxtra, The IoT Telco, our ecosystem and the IoT Industry.