Eagle
- GPS Location
- Flexible Data Logger
- Bluetooth Gateway
- Hardwired & Battery Backup
Advanced battery-powered or powered data logger with GPS featuring an impressive array of inputs/outputs, sensor interfaces and Bluetooth interface with a range of devices, switches and sensors to fit complex IoT applications.
Main Features
- High-precision GPS/GLONASS tracking device
- Cellular 4G connectivity
- 2x Digital Inputs, 1x Switch Ground Digital output, 1x Ignition Digital Input
- I²C, SDI-12 and RS-485 interface
- Bluetooth Low Energy (BLE) 5.0 Gateway
- Accelerometer for Smart Movement Based Tracking
- Configuration and management over-the-air (OTA)
- Geo-Fences
Example of Application
Bus or Single Sensors
Technical Details
GPS: uBlox EVA-M8
Concurrent GPS / GLONASS technologies
GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail
4G: uBlox SARA-R410M Modem
Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 26*, 28 (*roaming bands)
SIM Size: Micro 3FF SIM
Dimensions (in mm): L 183x W 145 x H 40
Weight: 564gr (batteries included)
Enclosure Rating: IP67
Recommended Operating Temperature: -20° to 60° C
Material: ABS Polycarbonate Plastic
Color: Grey
Different Mounting Options Available: screws, magnets, cable-tie, rivets, VHB high strength adhesive
Battery Type: C-Cell Batteries
Recommended Battery Type: Alkaline or Lithium Thionyl Chloride (LTC)
Quantity Needed per Device: 4
Battery Replaceable: Yes
Battery Voltage: 1.5V per cell (Alkaline) or 3.6V per cell (LTC)
Over-The-Air (OTA) Management: Configuration and firmware updates
Adaptive Tracking: Intelligently manage the frequency of GPS updates when it’s moving or stationary
Auto-APN: Select the correct APN details from a list that is pre-loaded in the device’s firmware
Battery Life Monitoring: Yes
Geo-Fences: Create custom areas and alerts if an asset enters or leaves specific locations. Monitor activity within the Geo-Fences
Impact Detection: Yes
3-axis Accelerometer: Yes
Sensor Monitoring (Analog/Digital Inputs):
- 2x 0-30V Analog inputs / Auto ranging, 12-bit ADC
- 3x Digital inputs: 0-48V DC input range, on/off thresholds, Pulse counting
Digital Outputs
- 2x Switched ground digital outputs
- Easily wired to control external devices, for example to turn a lighting tower on/off
I²C: “Inter-IC communications” is an interface commonly used in sensor modules
RS-485: RS485 interface supported to connect other sensors and devices
SDI-12: SDI-12 protocol is commonly used in sensors and measurement devices
4-20mA: 2x 4-20mA inputs can be used to interface to current loop sensors. Precision: 0.025mA
OEM server: Manage, monitor, configure, debug, update, and restart devices remotely from the cloud-based device management system
Telematics.guru: Customer-friendly platform to visualise and manage assets
Third Party Integration: Webhook, TCP or HTTPS, Direct and Data Splitting Integration Options
Declaration of Conformity: ACMA, CE
*Please contact us for a full list of compliance specifications and documentation for your region